EAGLE 4.0 TURKİSH USER GUİDE

Electronic Resources, EAGLE 4.0 TURKISH MANUAL subject " guide * eagle eagle eagle What is the use of * course * guide * Turkish eagle * "tagged with

The most common Eagle Layout Editor that many people who use electronic circuit design. You can remove the electronic circuit diagrams and them ...

Using the autoroute feature PCB (printed circuit board) can create

Prepared by: Dr. Hakan LIGHT - Jesus TRIGGER - Lutfi CAIQUES

Learning will do this book.
'll do a basic introduction to Eagle PCB design program with this book. Diagram drawing (Schematic Editor),
Printed Circuit Drawing (Layout Editor) and the Automatic Drawing (Autoroute is) we'll see. This book is a circuit diagram is drawn, you will learn to make the printed circuit drawing and automatic lawn. Of the
User Manual to be fully dominate the Eagle program and command should use the help menu.Öğreneğiz also frequently used commands. You can see the help file for more complicated commands. Before starting eagle \ You should review the readme.txt inside the doc directory. This book is designed for more than the Windows version. With the Linux version does not show much of a difference.

System Requirements
• IBM-supported computer (486 and above)
• Windows 95/98, Windows NT / 2000 or
• 2.x core, libc6 and X11 containing at least 8-bit Linux Distribution
• At least 50Mb of free space
• At least 1024 × 768 resolution preferred (800 × 600 resolution screen use is limited).
• 3-button mouse.

Features of the EAGLE program
• A maximum of 64 × 64 inch drawing area (1 inch = 2,54cm)
• 1 / 10.000mm (0.1 micron)
• mm or adjustable drawing guides by inches (s).
• Scripts
• the information input and output c-like language made
creation • Simple library
• Library catalog
• Technological feature support (such as 74L00,74LS00 ..)
• Creating the graphic output with the CAM processor and testing
• Printing possibility of obtaining
• Database-assisted track list
• Drag-and-drop management panel
• Automatic back-up function

Printed Circuit Drawing (Layout Editor)
• SMD support
• Multi-layered way support (up to 16)
• Specify conditions Design
• Identify Copper way

Diagram Drawing Unit
• 99-page support for each project
• Transferring a printed circuit instantly changes in Scheme drawings
• Automatic printed circuit transfer
• The source signal the automatic placement
• Electrical error control (short circuit diagram with consistency check between the printed circuit board) Automatic Drawing Unit • the rules of Design determination • Automatic printed circuit drawing manually change Possibility • Automatic the shape of the undesired copper path in the drawing will automatically change (RIPUP & retry algorithm) • Determining the printed circuit feature considering the cost factor • up to gridlines a 0.02 mm reduction • Up to 16 signal layers ( the user specifies) • Up to 14 source layer

Standard Edition
The following features are restrictions on the printed circuit diagram of the standard version.
• Printed circuit drawing area is limited to a maximum of 160 × 100 mm.
• Allows a maximum of 4 one source layer. (Top, bottom and two inner layers) Trial

The following features are restrictions on the printed circuit drawing of the trial. (Training and testing purposes).
• Printed circuit drawing area is limited to a maximum of 100 × 80 mm
• 2 allows only one source layer. (Top and bottom layer)
• Diagram drawing consists only of a single page.

Great drawings as small as can be sent to the printer.

Installing and Starting the Program

For Windows
Insert the CD into the drive. Select the version you want to install from the CD start menu. If you click on my computer icon cdrom If the CD does not open automatically. Follow the onscreen instructions to complete installation. The trial version is no need for the user license. If you want to remove the program, click Start> Programs> Eagle> Run unInstallShield. You can also run the program via cdrom burn it on your projects, but you can not save.

For Linux,
insert the CD into the drive. Select the associated directory (/ İngilizce / linux / install) and read the installation notes in the README file. Select the version you want to install. The trial version is no need for the user license. You can also run the program via cdrom burn it on your projects, but you can not save.

Eagle customized installation of
an installation instead of the standard features of the layout of menus, function keys, you can specify properties such as display color. Many settings are available about it on the Option. User interface can be edited individually. Options in the Control panel / User can make the necessary settings from the interface.

Concepts of Eagle Kollanıc Interface

Search by typing the command you want to use the command line like so that you can select from the toolbar or use the menu.

Abbreviations used in this book

• Select the menu item
? mark indicates the selection menu. ? File / Save as

• Mouse Clicks,
shown with the left mouse button clicks point. For Example. Click the right mouse button and F1 in terms of MOVE MOVE command and press the F1 function key. . . linear.lb is the meaning of the left mouse button to click twice on the file.

Use of Key Combinations
+ symbol indicates that the key is pressed at the same time. For example, Alt + F1 to show the meaning of the Old and F1 be pressed simultaneously.

• Commands are entered from the Command Line Parameters and
then entered from the command <icon replaces the enter. At the command prompt upper / lowercase distinction is not made. We can also shorten the change width 0.024 <command cha wid 0.024 <form.

Printed Circuit Drawing window

Command Toolbar for Printed Circuit Diagram Drawing and Drawing windows

Control Panel (Control Panel)
when we first opened the Eagle program control panel opens. Here you can open your project / save.Tıklaryarak the right mouse button you can create new projects come on top of the project. Can be viewed by clicking the Libraries section of the library and check out the features by selecting the elements you want.

Control Panel: The features of the library part of the 74 * 00 elements

In addition, user-defined programs, you can access the script file and CAM work. General information about the department you selected is located on the right. You can copy files via drag & drop in the window.

EAGLE Program Files
files that are in the following list are the most commonly used file types.

The difference is only in the Linux version of the file extension lowercase.

EAGLE Projects in
First, let's start a new project. After starting the program, respectively Project> examples> tutorial angle. Here you will find pre-made sample projects. Let's create a new project, saying New Project.

We can change the name of my project. If we want the project directory My Options / Directory can change the part. Eagle.epf file is created in the newly created project directory. Linux /.eaglerc the name of this file is. He studied projects currently indicated by the green circle. The program will continue the program from where we left off when you open it again.

Before beginning any exercise demo1.sch, demo2.sch, and demo2.brd files Project> examples> we created the tutorial directory just down the ctrl key to the project directory with state-copy mice. We can open the file by double clicking the demo1.sch.

Setting File Upload and View
just Project> examples> tutorial> Let's open with a double click the file you copied to the directory demo2.brd my project. If you are looking for? File / Open / Board can open the file you want from the menu.

Selecting Layers to display

Eagle settings are made with layers of display commands. There are around 100 layers. Can show the layer we want, we want to be able to remove. Examples of a few of them; topsheet, backsheet element layers showing the holes in the legs (pad layer), the lower layer to the upper layer, layers of linking holes (via layer) are such layers.

Layer Settings

We can choose if we want all of the layer with the All. We may remove all of the layers, with the option to No.

Important: The addition of 1 Top layer to change the position of the elements 23 torigins (zero point) of the layer must be turned on. The same is true for 24 borigins layers 16 Bottom layer.

Gridlines (Grid) settings and Units

Gridlines settings

Manual settings are made ​​with the grid lines command. Our opening the display section of the lines to appear (on), we need to open it. We can translate the dots option if we want to point the grid. Unit is the unit we want
You can define the part.

Lines, Circles, Arcs, Rectangles, and Writings

Lines, circles, rectangles, rectangles, and text, respectively, WIRE, CIRCLE, ARC, RECTANGLE and TEXT commands is done with. We make drawing easier thanks to these commands. Let me explain this by trying on the diagram drawing commands. Let's open a new diagram drawing file. From this control panel? File / New / Schematic from the can

WIRE Command

WIRE command is used to draw the line. Then click on the icon in the toolbar.

When you enter the WIRE command parameter appears below the toolbar. Let me explain them.

The drawing layer is set in a different color for each unit. For example, to electrical pathways blue, brown for the symbol used for the names and characteristics of gray symbols. appropriate color gamut processing will be selected here.

According to the shape of the line so you can draw lines seen in the toolbar. The size of the line-width, type of the (plain, dotted, dashed dotted line, etc.) can be done from Style section. Line drawing only a couple of mouse clicks of the mouse clicks start from where we want to we can finish where we wanted. We can also change the way the line with the right mouse button simultaneously.

Important: What should we use when making connection between symbols and the bus commands.WIRE command is only used to draw a line in the net or bus color.

You can change the CHANGE WIDTH 0.017 <size of the line with the key.
With CHANGE LAYER command can change the layer of the selected element.

Forward / Retrieval
I get back to the Eagle program / ​​rewind function is almost unlimited.

CIRCLE Flat Boots with command CIRCLE command is used to draw circles. If you want to run by clicking on the icon from the toolbar. The first mouse, just click the center circle, determine the radius of the second mouse click.

Spring Boots ARC Command : ARC command is used to draw the bow. ARC from the command line by typing the toolbar or by clicking on the icon you can draw a bow. Just click on the first and second third of the apartments click the first two sets of springs. To draw a circle drawn bow is different from a normal apartment. If you do a little experiment you will see how it is.

Drawing Rectangle with RECT command : RECT command is used to draw a rectangle. You can draw a rectangle by clicking on the icon from the toolbar or the command line by typing RECT. First we determine the click-click the first starting corner opposite corner of the second theme. The color of the rectangle is the color of the layer we found.

Writing the Script Writing TEXT : TEXT command is used to write text. TEXT from the toolbar or by typing the command line you can type text by clicking on the icon. When you run the command opens a small window. Your text here. Then leave this text where you want. You can also type the text you want to write a command line TEXT command is active.

CHANGE TEXT: Change the font. Pop-up screen font author.
CHANGE SIZE: Write to change the size.
CHANGE RATIO: Change the Write the thickness.

Custom Text Value of
the project, the number of pages that you send to the printer, can print values, such as file modification date.

LAST_DATE_TI to: modified date of the file PLOT_DATE_TI to: Outcomes date of purchase SHEET:Number of Projects page. NAME: The name of the element used VALUE: the value of the used element DRAWING_N Description: File Name

Library Use
it owns many of the elements in the Eagle library file library. Use these files as we ourselves can create your own private library file. In this section, how to create a library file and we'll see how it is used.Let's open a new drawing file,? File / New / Schematic.

Adding Elements to the ADD command
is used to add elements ADD command. You can also use the command line by clicking on the icon from the toolbar or by typing ADD. Library window to select elements when you give the ADD command opens. If you know that you can choose if you want to find the element or element is the name (Search) You can quickly by typing the name of a hazel section. Last instead of a single character when you search? icon or last place of all kinds of characters in length * You can use the icon. As an example, 74 * 74LS00N as 00 search results, 74LS00B, 74LS00FK, 74ALS00D, we found elements such as 74LS96D. You can see the search results below.

555 * 555N elements found in the search results. A few added element is named by adding numbers in ascending order to the end. For example, the IC element IC1, IC2, ... are called. The same in the integrated multiple doors to show that the same integrated door stated bulunabilir.b the door is seen as ABC .. alphabetically (IC1 to, IC1B, IC1C, IC1D). Also integrated into the leg of the same number of gates are shown on the symbol. There are symbols of the elements according to American and European standards. You can also add elements from the library in the Control Panel. Staff will simply drag and drop.

Now let's add a new element. 555 * as let's call by entering the ADD command. Press OK to select any element. Staff need to click the right mouse button to change the direction of placing.

Press ESC when the ADD instruction faster you can add elements to view the library again. We added element is connected to other elements will ask you if you want to add them. Leg of the voltage source and ground (pin) connection are not marked on the chart, but the printed
circuit marked.

Invoke command
leg number that connects to all the integrated power supply is different. For example, the 16-pin + VDD CMOS Integrated usually 16 legs, GND terminal 8 is the legs. Or 14-pin TTL integrated end is usually 14 + VCC GND 7. leg legs. We use to invoke the command to show the legs connected to the power supply on the chart.

Typing the command line invoke the toolbar or by clicking on the icon you can use.

Of a few pre-4001 will add integrated NOR gate. Click on Run to invoke the command element. If you double-click in the window that opens pwrn'y, integrated power connection is made.
You have 4 doors in an integrated normally gates A, B, C, D are inserted in the order form.

But we want to use the A and C door. If we can do this by selecting from the pop-up window by clicking on the C gates invoke the command is active, the door.

Diagram drawing
will learn how to do the road and connection drawings in this section. First, let's open a blank diagram drawing window.

Ready Project Framework addition
, you can use ready-made frame Eagle project. ADD command, run the search (search) Press the arrow keys or letter writing window frame. Choose the one that suits you from the frame and into the drawing area. For example, the letter calls will be two frames, LETTER_P and LETTER_L. LETTER_P vertical frame, LETTER_L form the horizontal frame. In the frames are more detailed search frame types. You can press Alt + F2 to see the overflowing frame off the screen.

You can write text frame using the Text command, number of pages, you can add features such as file creation date and time, or you can create an appropriate framework to yourself. They had to explain the details of the TEXT section.

Scheme Introduction to Drawing
Ready schemes in eagle / examples / tutorial below açalım.f6 key demo1.sch file with gridlines on or off.

Transferring information about the scheme: the schema information from the File / Export menu is made. When you click the Export button gives us the option. These elements Partlist list, Netlist link list serves to save the file in detail where the connection of which leg Pinlist member. Image is useful to save the image of the circuit.

We use the MOVE command to change the location of elements in the file. You can click on the desired location by moving the top of the active components we MOVE command. You can rotate the element with the right mouse button.

NET command
NET command elements used to connect the legs. Run by clicking on the icon from the toolbar or the command line by typing NET. Used to draw an electrical connection between elements. You can see the command DISPLAY PIN legs of the element.

NAME command
allows you to change the names of the components used in the project. By clicking the icon, you can run from the command line by typing NAME or toolbar. You can change the name of the element from the pop-up window by clicking with the mouse on the command element is active.

LABEL command
in the projects we have used to define labels to facilitate monitoring of the electrical path or connection. Run by clicking on the icon from the toolbar at the command line by typing or LABEL.LABEL command can move to where you want the text by clicking on the active path or connection.So you can find easier ways in complex circuits. The size of the text of the LABEL command, type, and you can change the CHANGE CHANGE FONT SIZE.

DELETE command
to delete the element benefit. Run by clicking on the icon from the toolbar or by typing the DELETE command line. Click on the element you want to delete the command is active. If we want to delete elements in bulk into the cluster, you can delete the GROUP command. GROUP command the future will be discussed in detail.

GROUP command
is used to collectively as processing elements into clusters (delete, copy, etc.). By clicking the icon, you can run from the command line by typing GROUP or toolbar. Click the command you want to run away into the active cluster command elements (for example, MOVE command). The command you want to apply to cluster components is different from the usual work with the right mouse button.

JUNCTION command
drawn wiring between components can pass through each other. Sometimes there may be a link in question and 8. intersection of two or more lines intersect; We specify this command bubağlantı are.Simgesinetıkla you can run from the command line by typing JUNCTION or toolbar. Click with the mouse to where you want the command is active.

SHOW Command
This command us to find the location of elements representing a single line or multiple connections (bus) indicates that where a terminal in conjunction with the drawings. By clicking the icon, you can run from the command line by typing SHOW or toolbar. SHOW command prints the name of the element is active, it displays the command line element. If we write the name of the port or the way it displays all the points connected to the road.

MOVE command
allows you to change the location and direction of this command element. By clicking the icon, you can run from the command line by typing or toolbar MOVE. Click on the element you want to leave the command is active and where you want. Elements need to click to move to the center. Simply click on the line to move to the nearest lines. Element line or change the direction of the element you click on the right mouse button is selected.

SMASH Command
Normally when we want to move an element is moved along with the name and label. SMASH command name and label text allows us to move separately. SMASH run by clicking on the icon from the toolbar or by typing the command line. Click on the text you want to take active SMASH command. Then you can move wherever you want regardless of the text element that separates the MOVE command. You can change the size of the text with the TEXT command.

Command VALUE
VALUE command to change the value of us benefit our members. At the command line VALUE run by clicking on the icon from the toolbar or by typing. VALUE command by clicking on the active element can change the value of the element from the pop-up window.

INFO command to
any component of the circuit (circuit elements, ports, etc.) to get information about benefits. By clicking the icon, you can run from the command line by typing INFO or toolbar. Click where you want the command is active.

COPY command
is used to copy the elements. COPY can run the command line by typing or clicking on the icon from the toolbar

PASTE command
is used to paste the copied elements. PASTE can run the command line by typing or clicking on the icon from the toolbar

CUT command
element is used to wipe the clipboard from where. CUT by typing the command line or run by clicking on the icon from the toolbar

MIRROR command
is used to retrieve the element opposite view. MIRROR, you can run the command line by typing or clicking on the icon from the toolbar. Click where you want the command is active. In addition, when using the MOVE command

ROTATE command
is used to change the direction of Elements. Run by clicking on the icon from the toolbar or by writing ROTATE command line. Click where you want the command is active.

Electrical Fault Control (Electrical Rule Checking-ERC)
we do the electrical connection errors positive and negative supply connections in the project will create a list of warnings that control to perform. By clicking the icon, you can run from the command line by typing the ERC or the toolbar. When we run the ERC command us in a way that opened in notepad data errors and warnings, and save it to the current directory.

Transferring Printed Circuit Diagram Drawing
toolbar at the top of the printed circuit board to transfer the project we do , we click on the icon.As we do circuit printed circuit board (Layout editor) will be transferred.

BUS command is
available in the form of an integrated sequence (A0, A1, A2, .. An) clusters in the shape of legs and other integrated into the same kind of leg Takbir line connected to form a single line, we use the command bus. This created a single integrated memory in the address connections (A0, A1, A2, .. An) or data connections (D0, D91, D2, ..., Dn) can give examples.

BUS from the command line by typing the toolbar or by clicking the icon, you can run. BUS connection process consists of two parts. Before going to integrate appropriate bus lines are drawn (address bus lines, data bus lines, etc.).

Then the legs are integrated with the NET command is connected to the BUS; MOST of us program to connect to the BUS (for positive and negative power supply) VALVE [0..11] (for other connections) want us to determine the form of the label. This tag must match the names of two or more integrated end connected by bus. So the integration of a tag VALVE5 tag end of the A5 A5 integrated into the other end of the bus line VALVE5 should be.

Function Keys
Back / Forward taking, the circuit to fit the screen, or allow us to assign key commands we use very often. You can see the command line by typing ASSIGN function keys and commands they use and may change.

Function Keys

Back Control and Related Automatic Drawing
Eagle a new scheme drawing (*. sch) printed circuit drawing of the same project file in the same directory as if we opened (*. brd) also appears. Changes made ​​on the same printed circuit diagram drawing drawings are transferred automatically. A schematic drawing of the printed circuit drawing work as a whole. Of the same project and the names of the printed circuit diagram drawing file extensions would be the same but different (bus.brd, bus.sch). If not the only one open relationship.In this case, the mismatch between a new startup files.

Note: Do not cover the printed circuit diagram drawing running, you can only minimize.

A Printed Circuit Board (PC Board) Design
in this section (Layut using Editor) is a small printed circuit board (PCB) design to create or we will learn how to change a circuit made ​​ready. This chapter is especially important for users who schematic unit.

Printed Circuit diagram without drawing
Let's open a new drawing file from the control panel (? File / New / Board)

Specifying the PCB shape
let's get the WIRE command to determine the contours of the printed circuit board first. Let us choose the part of 20Dimensio as layers from the above parameters, and let's determine whether the outline of the card. We need to finish where we started. You can change the location of the outer line with the MOVE command.

Adding elements
we want to add elements using the ADD command. Elements of the program can not find the menu?Library / User by clicking on the elements you can use to install the library of the components we iste10. You can change the names of the added element with the NAME command. You can change the value of the VALUE command. If the connection between the card through the copper element method (usually in a single sided printed circuit board), but we also want to bypass through the cable, we can do it with the SIGNAL command.

Icon on the toolbar if the form. This also means we want Autoroute can automatically organize.You can delete elements with the DELETE command.

Determining the Type of Your
Eagle width of the copper path (width), the distance between two paths (Clearance) For example, the copper to be resistant to current path from the power supply must be thick. I'll do with the CLASS command. But we add time to the width of the top of the card appears. For the way we circumvented the cable and set the width can not be made. Paths are provided in different widths in the examples.

CLASS ready as we can from the resulting window with the command ayarlarıkullan ourselves on whether we can use different values ​​different.

Export Printed Circuit Diagram Drawing
For example bus.sch file. We did the drawing to transfer circuit diagram printed circuit must click on the icon. The circuit is opened and are not arranged in the printed circuit editor is created in the same directory as the bus brd. Did you changing the location of the element with the MOVE command and place the outline of the card structure. If you run the command from the toolbar or RASTNESTClicking the icon will show in the status bar shows how many have links. In our example, there are 29 of them.

Automatic PCB drawing
automatically transferred to the printed circuit editor, but should organize our unregulated circuit.Let's open the automatic drawing window by clicking the icon. For showing us parts of erect single storey circuit layer 16 Bottom part of N / A or Set. Thus, our circuit will be set to a single storey. If you click OK you will see is trying to turn the circuit. This takes time depending on the complexity of the circuit and the speed of your computer. Circuit perfectly organized, but it will not save you from troubled many jobs.

If it takes longer to stop (stop) you can click the icon. The result will be a little different when you change the place of the circuit elements and now you can not do that just did. However the size of the road, the distance between two paths, elements act factors such as congestion.

Was appointed circuit condition-2, in the example below we do. Removed some ways to do this (with RIPUP command) and was rebuilt (the AOTUROUT). Made roads in the toolbar to restore or click icon on the command line you must write RIPUP. You must click on the copper path you want to remove the command is active. To remove all the copper paths RIPUP command is active, a pop-up window by clicking on the icon yes (yes) if we turn into the old ways, like all copper-1 to the state.

Making road users by copper (Manual)
do not like the copper paths made ​​by the autoroute command RIPUP delete command. You can manually paths with the ROUTE command. Icon on the toolbar if the form. Click the cable connection between the command active element copper road conversion work can begin. While drawing of the type of the parameter toolbar copper path, size, design features such as layers in the WIRE command.

SPLIT command
can change the shape of your order and made ​​of copper. SPLIT from the command line by typing the toolbar or by clicking the icon, you can run. Edit the way you want by clicking on the copper path command is active.

NOTE: DISPLAY to remove show the layers in the printed circuit drawing as in Diagram drawing, MOVE to move elements, GROUP to cluster elements, to change the property CHANGE, SHOW to show elements, RIPUP to remove copper ways to create copper path ROUTE, elements within show SHOW,

COPPER PLATED
I Demo2.Brd file's open. Top with only 1 DISPLAY command to avoid confusion in the circuit, 17 Pads, 18 Vias, and 20 Dimension layers show Let's remove the other layers. (Case-1) Let's remove the GND GND signal RIPUP command. From the toolbar, click the icon to enter the command line, type GND'll print it. You can select the way you want the limits of the circuit. Finish where you started with a double click. (Case-2) Then RASTNEST the command line or click the icon (Case 3). You can see the screenshot below we have done.

Selecting the Design Type (Design Rule Check)
to design the shape of the circuit elements, such as the lengths of the legs of different companies looking to import different types of design features, we need to make specific arrangements. Or write DRC command to make these arrangements, we 'll click on the icon, a dialog window as shown in the picture below.

DRC Dialog Window

After making the settings are transferred to the card design we click on the OK button. If the error (Pad in size, the size of the rivet, as the thickness of the copper roads) have shown to us the fix.

Libraries
As you know, diagramming and design elements that you add to the printed circuit from the library.Library Editor with the printed circuit diagram editor and has the same user interface. Library to use the editor to know a few extra command is sufficient.

The library consists of 3 unit elements.

• Package (Package): the legs of the image elements in the printed circuit diagram
• Symbol (Symbol): the image in the drawing Scheme
• Device (Device): Package and the actual appearance of symbols

To open a new library file? File / New / Library y, let's open.

Resistance Package (Package Resistor)
 Unpack the symbol editing mode, and enter the package name as R-10. Then answer the question, yes. Enter the 0.05-inch guide lines with the icon.

The parts to be soldered to the printed circuit symbols will be created (pad) to create interest we select the parameter bar as follows. Pad in shape, diameter (diameter), the width of the hole (drill) is used to adjust. I add two pad in the desired range.

icon size on the film resistors and film resistors capacitors and integrated by some firms even used to create the legs. Parameters are as follows toolbar. You can adjust the roundness of the element with the roundness.

The layer to be placed on the bottom of the part of the card, select 1 Top layer. Element MIRROR command is transferred to the back of the card. Thus, t .. (Top) layer b .. (bottom) layer is moved. 2 SMD pad add one.

You can change the names of the element with the symbol. Elements are called in ascending order.

See how the element 21 is made ​​to determine the lines tpla by layer. Up to you how you make your symbol in a detailed manner. ARC, CIRCLE, RECT and POLYGON commands you can use. Make the wire 51 Tdoc layer over the pad. You can add the wire with the icon.

We can add text with the icon. Custom text, such as in the diagram drawing can also be used (> VALUE). SMASH and text can be moved with the MOVE command.

From the toolbar, you can change the properties of the element by clicking on the icon.

Resistor Symbol (Resistor Symbol)
the symbol editing can now click on the icon. Enter R as a symbol name and set gridlines as 0.1 inches. Eagle's preferred 0.1 d.

To run the command PIN click the icon. Select the parameters as desired features from the toolbar.

You can change the names of the pins with the icon.

You can add text and led to their Symbols layer icon.

Resistance Device (Resistor Device)
that you use to access the elements we need to add to the library of the Scheme drawing name you entered when you click the icon. We have R-10 Let's go. Be the same as the device name with the package name only cause conflict. To identify the device name in different packages and you can use technology * and * mark. * Technology name, * The name replaces the packet type. Two different technologies (L, LS) is required to define the 7400 device, the device name is 74 * 00 roll. The end of the package type name to be added automatically. So there is no need to write 74 * 00 *. If you want to see the beginning of the name of the package type * * 74 * You can add icons to the beginning of the name of the form 00.

PREFIX how increasing names to the same types of elements added to the command schema editor (IC1, IC2 ... .ıcn) will be indicated. On the Value of the structure's value to change the value of the element from the schema editor. You can change the name of the door with the icon. Name is not important for port elements. But they are important because they show on the diagram drawings for multiple doors.

Giving the CONNECT command from the command line or by pressing the Connect button in the above figure, let's open the dialogue window side. We define the legs drawn package with the symbol of the leg link that we draw in this window. Game Pin the figure given name for this definition 1.P $ 2 with $ P $ Pad 2 Select the name given to the section Connection adds the right side making a connection between the two when we press the CONNECT button. If you believe you made the wrong connection, select the connection in the Connection of connection if you press the cancel button Disonnect Edri.

DESCRIPTION When you enter the command we want to write descriptive information about the created element opens a dialog box as shown alongside. Wrote here, we can write cookies using HTML code

We use the ADD command that create results Device name appears in the form of a tree structure in the library file, we do 40xx and added to appear as new symbols branches of an element in the diagram drawing may be more than a symbol or say 40 series to create a separate symbols indicated the integrated

Received made ​​of the output of the drawing
Overall if we want to print it out in our drawings or printed circuit schematic editor for the Windows version of the file, we need to select the print menu seçeng. Enter the PRINT command from the command line, we also enjoy the following window is sent to the printer after the necessary settings on the printer output here

Appeared in the Linux version is a bit headlights get in after postscricpt file created lpr command is sent to the printer before.

Source File: Eagle 4.0 Turkish User Guide